Description
High-Pressure Injection Quills are used to inject chemicals pumped by metering pumps into the turbulent flow zone of high-pressure water or steam lines.
FEATURES AND BENEFITS
• Available with spring-loaded check valve (QC) or no spring-loaded check valve (QB) options
RECOMMENDATIONS
• For lines smaller than 4″ diameter, trim quill so chemical is released near center of line. Use as-is for lines over 4″ diameter.
• Install with “Telltale” V-notch facing upstream so flow strikes angled face at end of quill for most rapid dispersal of injected chemical.
• For maintenance ease, installation of an isolation valve, rated above line operating pressure, immediately behind the quill is recommended.