Apex logo
Apex Water + Process logo

Safer Chemical Handling: 5 Ways to Protect Your People and Operations

Safe chemical handling is essential to protecting your people, your facility, and the systems your operation depends on. A leaking connection, unclear label, or difficult container change can turn an everyday task into an exposure risk or interrupt chemical feed. How chemicals are delivered, stored, and fed deserves the same attention as the treatment program itself.

Reducing these risks requires a coordinated approach, from delivery and storage to feed equipment, monitoring, and maintenance. By evaluating the entire process alongside the tasks employees perform each day, facilities can identify weak points, reduce unnecessary chemical contact, and address problems before they disrupt operations.

These five best practices provide a practical starting point for safer chemical handling and more reliable operations.

01. Start with a facility specific safety review

A chemical safety review should reflect the products a facility uses and the conditions employees encounter. Walk through the process from the delivery connection to the point of feed, including equipment maintenance and container changes. Look for recurring leaks, chemical residue, damaged components, and tasks that require unnecessary contact with chemicals.

 

Use the findings to prioritize corrective actions and establish a review schedule based on site risks. Routine inspections and reassessment after changes to chemicals, equipment, or procedures help keep the review relevant to daily operations.

WHAT TO LOOK FOR
_____
  • Clear labels and product identification
  • Accessible safety data sheets and PPE
  • Emergency eyewash and shower access
  • Storage and feed equipment condition
  • Delivery and response procedures

02. Build containment into the system

Containment provides an additional layer of protection if a primary container or component leaks. Depending on the application, that may include double wall bulk storage, contained feed boxes, or a complete chemical feed skid with containment.

Evaluate the full chemical path. Storage tanks, pumps, valves, and transfer connections can each present potential leak points. Equipment materials and containment design should suit the chemical, operating conditions, and facility requirements. Qualified design and installation help ensure the components work together and remain accessible for inspection and service.

03. Reduce manual chemical handling

Frequent drum and tote changes can add lifting, transfer, and connection tasks to an operator’s workload. Where appropriate, direct delivery to dedicated bulk storage can reduce the need for employees to move containers or transfer chemicals themselves.

Delivery planning should also address correct product identification and the intended receiving tank. Clearly labeled delivery systems and controlled access to fill valves, such as designated key arrangements where appropriate, can support product verification. Trained delivery personnel and established procedures remain essential parts of the process.

A KEY PART OF THE PROCESS
_____
 

An alarm is useful when someone knows what it means and how to respond.

04. Give monitoring a response plan

Tank level monitoring, leak detection, and pump or system status monitoring can help facilities recognize conditions that need attention. Remote monitoring may offer additional visibility where available and appropriate for the application.

An alarm is useful when someone knows what it means and how to respond. Assign responsibility for reviewing alerts, define escalation procedures, and include monitoring devices in the inspection and maintenance program. These tools support ongoing oversight and work alongside physical inspections.

05. Keep training and maintenance ongoing

Operators need to understand the installed equipment and the chemicals they work with. Training should cover normal operation, relevant hazards, protective measures, and the facility’s response procedures. OSHA’s Hazard Communication Standard addresses chemical hazard information through labels, safety data sheets, and employee information and training.

Preventive maintenance and follow-up inspections help keep handling and feed systems in working condition. Document findings, assign corrective actions, and verify completion so recurring problems receive attention. Engineering controls that reduce exposure should work alongside appropriate procedures and PPE.

PUTTING BEST PRACTICES INTO ACTION

How Apex can help

Apex Water & Process can help conduct a chemical handling walkthrough, review existing equipment and practices, and identify opportunities to reduce risk. Recommendations may include changes to procedures, training, or maintenance, alongside equipment improvements where needed.
Engineered storage and contained feed
Hands-off chemical delivery
Integrated monitoring technology
Installation, training, and ongoing support
Through EnviroSafe™, Apex coordinates these services around the needs identified during the review.

Brett Robison

Keith Clardy

Business Development Director

With over 33 years of experience in water treatment and the power industry, Keith brings extensive expertise in boiler, cooling, and wastewater treatment applications. Throughout his career, he has held leadership positions with national organizations and founded, operated, and successfully sold a private water treatment company after 12 years of ownership. He currently serves as Business Development Director at Apex Water & Process, leveraging his technical expertise and industry experience to support customers nationwide.

Related Posts

Data Center Water Readiness Before Design Is Finalized

AuthorBrett Robison, Director of Corporate AccountsFive decisions that connect utility planning with commissioning and reliable coolingWater supply and wastewater acceptance can affect when a data center is built, commissioned, and expanded. Developers and project...

read more

Please enter your email address to receive your cart as a PDF.